Audio Technica VM740ML MM Cartridge

• VM740ML
• Dual Moving Magnet Stereo Cartridge
• High-end model featuring a Microlinear stylus in an aluminium die-cast alloy body. In addition to outstanding high-frequency reproduction, this model enables clear sound image localisation.
• Aluminium tapered cantilever
• Para-toroidal coils improve generating efficiency
• Centre shield plate between the left and right channels reduces crosstalk
• Die-cast aluminium alloy housing reduces vibration and adds a natural electrical shield
• Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head.
• Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.
• Para-toroidal generating system
• Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
• Centre shield plate reduces crosstalk
• A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
• 700 Series
• Top-end model fitted with the die-cast aluminium alloy housing. The body reduces the unwanted vibration and enhances the superior sound quality of high-performance line contact styli.
• Microlinear Stylus
• Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.
  

• Cartridge & Stylus
• Frequency Response
  20 - 27,000Hz
• Channel Separation
  28dB (1kHz)
• Vertical Tracking Angle
  23˚
• Vertical Tracking Force
  1.8 to 2.2g (2.0g standard)
• Stylus Construction
  Nude Square Shank
• Recommended Load Impedance
  47,000Ω
• Coil Impedance
  2,700Ω (1kHz)
• Output Voltage
  4.0mV (1kHz, 5cm/sec.)
• Output Channel Balance
  1.0dB (1kHz)
• Stylus Shape
  Microlinear
• Cantilever
  Aluminium Tapered Pipe
• Static Compliance
  40 x 10-6 cm/dyne
• Dynamic Compliance
  10 x 10-6 cm/dyne (100Hz)
• Mounting
  1/2” centres
• Dimensions
  17.3 (H) x 17.0 (W) x 28.2 (L) mm
• Accessories Included
  Cartridge installation screws 5mm ×2 and 10mm ×2,
  Washer ×2,
  Hexagon nut ×2,
  Non-magnetic screwdriver ×1,
  Brush ×1,
  Lead wire set ×1
• Recommended Load Capacitance
  100 – 200pF
• Replacement Stylus
  VMN40ML
• Stylus Size
  0.12 x 2.2 mil
• Type
  VM Type
• Weight
  8.0g
  
  

N/A