Audio Technica AT33MONO MC Cartridge

• AT33MONO
• Moving Coil Cartridge
• The AT33MONO is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally.
• The AT33MONO produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records, producing audio that you couldn't possibly get from a stereo cartridge.
• The AT33MONO also has appropriate compliance in the vertical direction, so will not cause damage to stereo records. Enjoy those well-known classic mono records of yesteryear with the AT33MONO.
• Mono cartridge compatible with stereo playback systems.
• Conical stylus chip and hard duralumin cantilever.
• 10O middle impedance specification.
• PCOCC coil prevents crystal gain boundary formation (in transmission direction).
• Strong body stabilized by a rigid body set-up.
• "Hanenite" anti-vibration rubber eliminates unnecessary vibrations.
• High-quality sound / Brass fastening screw.
  *This model is not compatible with SP records.
  
  “A True Mono Cartridge”
  The AT33MONO cartridge only generates electrical signal with horizontal movement due to the horizontal configuration of the coil.
  
  “Eliminates unnecessary vibration”
  ‘Hanenite’ anti-vibration high-damping rubber eliminates unnecessary vibration.
  
  Internal wiring on AT33MONO featuring two horizontal voice coils, each voice coil terminations available independently.

• Cartridge & Stylus
• Frequency Response
  20 - 20,000Hz
• Channel Separation
  30dB (1kHz)
• Vertical Tracking Angle
  23°
• Vertical Tracking Force
  2.3 to 2.7 g (standard 2.5 g)
• Recommended Load Impedance
  More than 100Ω (when head amp connected)
• Coil Impedance
  10Ω (1kHz)
• DC Resistance
  10Ω
• Coil Inductance
  28µH (1kHz)
• Output Voltage
  0.35mV (1kHz and 5cm/sec. horizontal signal)
• Output Channel Balance
  1.0dB (1kHz)
• Stylus Shape
  Conical
• Cantilever
  Duralumin pipe
• Static Compliance
  20×10-6cm/dyne
• Dynamic Compliance
  6×10-6cm/dyne (100Hz)
• Mounting
  1/2" Centers
• Dimensions
  H16×W16.6×D26.5mm
• Accessories Included
  Non-magnetic screwdriver x1,
  Washers x2,
  Protector x1,
  Cartridge fastening screw 13mm×2, 19mm×2,
  Nut x2,
  Brush x1,
  PCOCC lead set x1
• Body Material
  Aluminium/Synthetic Resin
• Stylus Size
  0.65 mil
• Type
  MC-type
• Weight
  6.9g
  
  
  

N/A