Audio Technica AT33EV MC Cartridge

Audio Technica AT33EV MC Cartridge

Regular price£429.99
/
Tax included. Shipping calculated at checkout.
  • Free UK shipping
  • Collection in store available

Moving Coil Cartridge

  • AT33EV
  • Moving Coil Cartridge
  • The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model.
  • The A33EV is a ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.
  • Elliptical stylus chip and durable duralumin tapered pipe cantilever
  • 10O mid impedance specifications
  • Dramatically increased magnetism with neodymium magnets and PCOCC as the coil
  • High separation, wide-response dual moving coil
  • VC Mold eliminates unnecessary vibrations
  • "Hanenite" anti-vibration rubber eliminates unwanted vibrations
  • “Minimises unnecessary vibration”
  • ‘Hanenite’ is used in the housing interior and the cantilever fulcrum support to minimize unnecessary vibration, to allow the outstanding basic performance of the dual moving coil to fully express itself.
  • “Ability to richly reproduce sounds”
  • Elliptical stylus chip, embedded into a hard duralumin tapered pipe cantilever, has the ability to richly reproduce sounds in the medium and low ranges. With its outstanding machine strength, the duralumin cantilever is tough enough for the job and produces natural sounds without distortion.

  • Cartridge & Stylus
  • Frequency Response
    15 - 50,000Hz
  • Channel Separation
    30dB (1kHz)
  • Vertical Tracking Angle
    23°
  • Vertical Tracking Force
    1.8 to 2.2 g (standard 2.0 g)
  • Stylus Construction
    Nude Square Shank
  • Recommended Load Impedance
    More than 100Ω (when head amp connected)
  • Coil Impedance
    10Ω (1kHz)
  • DC Resistance
    10Ω
  • Coil Inductance
    22µH (1kHz)
  • Output Voltage
    0.3mV (1kHz and 3.54cm/sec.)
  • Output Channel Balance
    0.5dB (1kHz)
  • Stylus Shape
    Elliptical
  • Cantilever
    Duralumin
  • Static Compliance
    40×10-6cm/dyne
  • Dynamic Compliance
    10×10-6cm/dyne (100Hz)
  • Mounting
    1/2" Centers
  • Dimensions
    H16×W16.6×D26.5mm
  • Accessories Included
    Non-magnetic screwdriver × 1,
    Washer × 2,
    Protector × 1,
    Cartridge installation screws 13 mm × 2 and 19 mm × 2,
    Nut × 2,
    Brush × 1,
    PCOCC lead set × 1
  • Body Material
    Aluminium/Synthetic Resin
  • Stylus Curvature Radius
    0.3 x 0.7 mil
  • Terminal Pins
    Brass
  • Type
    Dual Moving Coil
  • Weight
    6.9g



This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

N/A


Recently viewed