Graham Slee PSU 1 Enigma

Graham Slee PSU 1 Enigma

Regular price£385.00
/
Tax included. Shipping calculated at checkout.
  • Free UK shipping
  • Collection in store available

Micro Singal Power Supply Originally designed for the Accession MC it has since also found favour with users of some of our other phono stages...

  • Perhaps stating the obvious, but what you hear from any amplifier or preamp is because current flows from a power supply and then back to it. Basic understanding sees that It leaves by one terminal and returns to another.
  • Thanks to Kirchhoff's scientific current laws and the law of conservation of energy we can see current leaves from its origin somewhere in the power supply and has to get back to that origin. Signal current, no matter how well it is treated by the phono stage, must negotiate the inner workings of the power supply. Knowing that origin and how it gets back to it is crucial in understanding how best the micro-signal current returns to its origin with the least possible disturbance.
  • The Enigma solution was to lower the dissipation factor, improving dielectric absorption (similar to PTFE and polypropylene) for greater frequency stability such that all frequencies of signal current are treated more equally. And additionally: fine tuning its Kelvin paths and giving it a new DC cord and lockable outlet.
  • The result is greater clarity particularly when using the Accession MC phono stage, in fact it's like getting the improvement the standard issue Accession MC provides, all over again.
  • Dropping dissipation factor also increased ripple current handling by 35%
  • Dealers as well as early adopters of the PSU1-Enigma have found subjective improvements with our other products too

  • Input range
    0.15mV to 0.8mV
  • Output (for input range)
    2mV to 10mV, suitable for a moving magnet phono stage input
  • Maximum input
    378mV rms (a very large overload margin)
  • Maximum output
    4.914V rms
  • Gain
    22dB (13) < 10Hz to 917kHz (-3dB points)
  • Input impedance
    23, 30, 100, 840, 1000, 5100 and 47000 Ohms
  • Output (driving/source) impedance
    300 Ohm
  • Recommended load impedance
    47k Ohms phono stage preamp input
  • Noise at output
    -99dB CCIR Q-pk
  • Distortion
    0.02%
  • Frequency response
    < 10Hz to 917kHz (-3dB points)
  • Channel balance
    0.2dB
  • Channel separation
    64dB
  • Size (approx.)
    W: 107 x H: 50 x D: 180 (mm) inc. jacks


This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

N/A


Recently viewed