Chord Company PowerARAY Professional

• The PowerARAY Professional does not use power. It introduces a potential gradient that turns selected high-frequency noise into heat.
  
• The internal earth, live and neutral are connected individually to dedicated SuperARAY conductors and MainsARAY noise reduction devices, providing a low-impedance path to ground and lowering the noise floor of your system.
  
• All internal components are held in place by a machined billet and encased with damping resin.
  
• Available fitted with Signature, Sarum or ChordMusic power cables and with UK or Euro (schuko) power connectors.
  
• Installation
• For optimum performance slightly loosen the screws that hold the ultra-lightweight feet in place. The feet are decoupled by a damping suspension ring located between the foot and the chassis.
• PowerARAY Professional should be connected as close as possible to the socket supplying your audio system and can be used alongside other ARAY products.
• PowerARAY Professional can be connected to a mains distribution block.
• For a Chord Company PowerHAUS M6 use the socket furthest from the power input.
• For a Chord Company PowerHAUS S6 use the socket closest to the power input.
• If a non-Chord Company mains block is being used we recommend connecting to the socket closest to the power input.
• Keep PowerARAY Professional clear of cables and other components.
• If you are using a twin electrical socket we suggest connecting to the socket next to the one supplying your equipment.
• If connected to a power socket with a switch, please switch the socket on to get the full performance from your PowerARAY Professional.
  

• N/A
  
  

N/A