This next-generation cartridge takes the philosophy and design of the innovation AT-ART1000 to a new level, with a more refined direct power system for improved efficiency and enhanced bass reproduction. Developed and manufactured in Japan, utilising cutting-edge materials and design elements, the AT-ART1000X delivers the ultimate listening experience to audiophiles around the world.
Like its predecessor, the AT-ART1000X features a direct power system that places the dual moving coil directly above the stylus tip, ensuring that the audio quality does not suffer the negative effects normally introduced by the cantilever's length and material type. Having the coils move in such close proximity to the stylus tip allows the cartridge to vividly render even the most subtle sonic details and provide unsurpassed transient response. The newly developed coils for this model are rectangular, however, not round, in order to position more of their surface area in the magnetic field. This enables the cartridge to more accurately reproduce strong modulations, resulting in improved output voltage and an expanded low-frequency range.
Each non-magnetic core coil is constructed of 20 μm (0.79 mil) diameter PCOCC (Pure Copper by Ohno Continuous Casting) wire handwound eight turns to create a 1.1 mm × 0.6 mm (0.043" × 0.024") rectangle. The coils are contained in ultra-thin 25 μm (0.98 mil) special film and placed in the tiny 0.5 mm (0.020") gap of a powerful magnetic circuit, enabling each coil to generate an output voltage of 0.22 mV with a coil impedance of 3.5 Ω, despite having a non-magnetic core.
The AT-ART1000X retains the high-performance line contact stylus and solid boron cantilever from the previous model to ensure an extremely accurate reading of the record groove. The base that supports the specialised magnetic circuit and vibration system is made from titanium.
This sturdy base is instrumental in providing consistent playback, and works in combination with the cartridge’s hard plastic cover and aluminium housing to disperse resonance that negatively affects the sound quality. A special coating protects the magnetic circuit from corrosion for stable performance throughout the life of the cartridge.
Finally, the body of this new model features threaded mounting holes, making the cartridge much easier to install. The included screws alone are enough to mount the cartridge to a headshell or integrated tonearm.
Please Note: AT-ART1000X’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.
Unsurpassed High-Fidelity Playback
Unique Direct Power System
The innovative direct power system developed for the AT-ART1000, which places coils on top of the stylus to capture the subtlest sonic details, has been updated to include rectangular non-magnetic core coils for enhanced efficiency and extended low-frequency output
Premium Stylus and Cantilever
The cartridge’s special line contact stylus offers premium high-frequency response with minimum abrasion to greatly reduce distortion and record wear. Affixed to a solid boron cantilever (0.26 mm diameter), the stylus reads the record groove with extreme accuracy.
Threaded Mounting Holes
The body of the AT-ART1000X features threaded mounting holes to make installation a breeze. Use the included screws to quickly mount the cartridge to a headshell or integrated tonearm.
Innovative direct power system delivers unsurpassed transient response, resulting in reproduction of even the most subtle sonic details
Newly designed rectangular coils improve the cartridge’s efficiency and extend low-frequency output
Threaded mounting holes make it easy to install cartridge to headshell or integrated tonearm
Special line contact stylus and solid boron cantilever with a 0.26 mm diameter ensure an extremely accurate reading of the record groove
Non-magnetic core coils provide exquisite, full-dimensional audio reproduction
Magnetic circuit’s titanium base works in combination with the cartridge’s hard plastic cover and aluminium housing to disperse unwanted resonance
PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
Special coating protects the magnetic circuit from corrosion for stable performance throughout the life of the cartridge
Developed and manufactured in Japan by skilled experts
Please Note: AT-ART1000X’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.
Cartridge & Stylus
Frequency Response
15 - 30,000 Hz
Channel Separation
30 dB (1 kHz)
Vertical Tracking Angle
19°
Vertical Tracking Force
Refer to “Tracking force information” included in the box.
Recommended Load Impedance
≥ 30 ohms (when head amplifier connected)
Coil Impedance
3.5 ohms (1 kHz)
DC Resistance
3.5 ohms
Coil Inductance≤
1 μH (1 kHz)
Output Voltage
0.22 mV (1 kHz, 5 cm/sec.)
Output Channel Balance
0.5 dB (1 kHz)
Stylus Shape
Special line contact stylus
Cantilever
0.26 mm (0.010") diameter solid boron
Static Compliance
20 × 10–6 cm/dyne
Dynamic Compliance
9 × 10–6 cm/dyne (100 Hz)
Dimensions
17.3 mm (0.68") × 17.0 mm (0.67") × 25.5 mm (1.0") (H × W × D)
Accessories Included・
Case (wooden box)・
Non-magnetic screwdriver・
Washer × 2・
Protector・
Cartridge installation screws (M2.6) (5.0 mm × 2, 8.0 mm × 2, 10.0 mm × 2, 12.0 mm × 2)・Brush
Threaded Hole
M2.6 × 2
Stylus Curvature Radius
1.5 × 0.28 mil
Type
Direct power system, non-magnetic core coil (MC) type
Weight
11 g (0.39 oz)
Notes
For product improvement, the product is subject to modification without notice.
