Graham Slee AgSat90 Analogue Interconnect Cable

• Emphasizing The Musical Edge
• A 0.71mm soft fine silver wire of 99.99% purity is added in parallel with the 1mm annealed copper signal conductor to give emphasis over a well-balanced sound.
• Meticulously assembled by hand, the AgSat90's silver wire is loosley injected into an insulation channel adjacent the main copper signal conductor to which it is connected at either end.
• Whereas 100% silver wired interconnect cables are subjectively hard and overly bright sounding, the careful balance between the conductivities of silver and copper metals makes the tonal balance much more palatable.
• The addition of silver to an otherwise highly conductive copper cable subjectively adds a particular accent to the sounds of metalic and strung instruments, producing more of a shimmer to cymbals and highlighting the sound of strings.
• Consider that the most common interconnection cables are copper made, and the finished sound of a recording will be balanced to sound just right using such. Then playback using a more conductive metal will sound subjectively different - and silver is the most conductive of all metals.
• Is it high fidelity though? Anything that alters the sound from what is intended is obviously not, but where system synergy isn't delivering the snap and sharpness it ought to be doing, the AgSat90 might be just the solution needed.
• Otherwise, the AgSat90 has all the excellent shielding and sonic features of our other high quality interconnects.
  
  
  

• Coax stock cable diameter
  6.5mm
• Single cable sheathed diameter
  10mm
• Inner conductor
  1mm diameter solid soft annealed copper;
• DC resistance:
  0.026 Ohms per metre
• Silver conductor
  0.71mm soft fine silver wire of 99.99% purity
• Shield
  Annealed copper braid over 100% copper foil wrap;
• DC resistance:
  0.015 Ohms per metre
• Jacket
  PVC
• Dielectric
  5 cell semi air-spaced
• Dielectric constant
  1.49
• Velocity ratio
  0.82 (82%)
• Capacitance
  90pf per metre
• Characteristic impedance
  75 Ohms
• Shielding efficiency
  Better than 65dB
• Lay-up
  "dual-mono" Seperated stereo pair overall flexible PVC braided with welded ends
• Direction
  Marked as "run of the mill"
• Min safe bend diameter
  150mm (6 in)
• Phono terminations
  Locking phono (RCA) plugs with gold plated contacts
  
  
  

N/A